ME7.4.4 0261206942 1037353511 ORI is the original full BDM backup of a Bosch ME7.4.4 fitted to the Peugeot 206 1.6 16V (PSA 9638783480): external flash 512 KB + EEPROM 95160 (2 / 4 / 8 KB formats, multi-tool), read on the bench and delivered unmodified.
What you get (2 ZIPs, 860 KB in total)
✔ ME7.4.4 0261206942 1037353511 ORI full BDM backup – external flash 512 KB + EEPROM 95160 (2 / 4 / 8 KB formats, multi-tool), read from the same ECU
✔ INFOS.html datasheet in 12 languages
✔ Unmodified original read – no tuning, no immobilizer change, no checksum work
Complete bench read of the Bosch ME7.4.4 used in the Peugeot 206 1.6 16V: external flash 512 KB + EEPROM 95160 (2 / 4 / 8 KB formats, multi-tool) from one and the same ECU, delivered as 2 ZIPs with an INFOS.html datasheet.
This is what tuners call a full BDM or full backup – not the flash alone. Moreover, the ZIP is delivered instantly once the order is paid.
Two independent reads of the same software, from two different ECUs. Each read is complete and unmodified. Read #1 is the one to write; keep the other to compare or to double-check your own read – the differences are listed under Archive contents.
Not sure it is your file? For example, send us a photo of the ECU label or a screenshot of your tool’s identification screen before ordering – we confirm the match.
Compatible vehicles
| Vehicle | Engine | Status |
|---|---|---|
| Peugeot 206 | 1.6 16V | confirmed for this software |
Hardware 0261206942 was fitted with 4 software states in our catalogue, so the engine badge is not enough: compare HW 0261206942 and PSA 9638783480 on the label, then the software number in your tool.
With HW 0261206942 but PSA 9638783480 / SW 1037353327, take that file.
Archive contents
Read #1 – 0261206942_9638783480_SW1037353511_N1.zip (423 KB)
| File | Memory | Size |
|---|---|---|
0261206942_9638783480_SW1037353511_N1_FLASH.bin | External flash | 524 288 bytes (512 KB) |
0261206942_9638783480_SW1037353511_N1_EEPROM_2KB.bin | EEPROM 95160, native format | 2 048 bytes (2 KB) |
0261206942_9638783480_SW1037353511_N1_EEPROM_4KB.bin | EEPROM 95160, 4 KB format, same data | 4 096 bytes (4 KB) |
0261206942_9638783480_SW1037353511_N1_EEPROM_8KB.bin | EEPROM 95160, 8 KB format, same data | 8 192 bytes (8 KB) |
INFOS.html | Datasheet: references, vehicles, file list, checksums (12 languages) | – |
Read #2 – 0261206942_9638783480_SW1037353511_N2.zip (438 KB)
| File | Memory | Size |
|---|---|---|
0261206942_9638783480_SW1037353511_N2_FLASH.bin | External flash | 524 288 bytes (512 KB) |
0261206942_9638783480_SW1037353511_N2_EEPROM_2KB.bin | EEPROM 95160, native format | 2 048 bytes (2 KB) |
0261206942_9638783480_SW1037353511_N2_EEPROM_4KB.bin | EEPROM 95160, 4 KB format, same data | 4 096 bytes (4 KB) |
0261206942_9638783480_SW1037353511_N2_EEPROM_8KB.bin | EEPROM 95160, 8 KB format, same data | 8 192 bytes (8 KB) |
INFOS.html | Datasheet: references, vehicles, file list, checksums (12 languages) | – |
Read #2 compared with read #1: 41 bytes differ in the flash (2 areas: 0x00FA14–0x00FA3B, 0x00FA45); 589 bytes differ in the EEPROM (192 areas: 0x000006–0x00000F, 0x000018–0x00001E, 0x000028–0x00002E, …).
The EEPROM is supplied in three formats for multi-tool compatibility – 2 KB / 4 KB / 8 KB – with the same data: 2 KB is the chip’s native size, the larger ones suit tools that expect a bigger file. Load the one your tool accepts.
Flash and EEPROM are from the same unit, so writing both gives a coherent ECU (immobiliser data of the donor car included). The MPC internal flash is not part of the archive: it is not needed to restore, clone or compare an ME7.4.4 with the usual tools.
ME7.4.4 0261206942 1037353511 ORI – references
| ECU | Bosch ME7.4.4 |
| Bosch hardware (HW) | 0261206942 – printed 0 261 206 942 on the label |
| PSA part number | 9638783480 – printed 96 387 834 80 |
| Software (SW) | 1037353511 – also written SW1037353511 |
| Upgrade / SW upg. | none – your tool shows 1037353511 in both fields, or leaves the second one empty |
| Memory supplied | External flash 512 KB + EEPROM 95160 (2 / 4 / 8 KB formats, multi-tool) |
| Read method | Bench / BDM, complete read, file unmodified |
| Delivery | ZIPs 860 KB, instant download after payment |
In workshop language this is an ORI file or full BDM backup of the ME7.4.4 (fichier d’origine in French, file ori in Italian).
Notes on this file
We read two ME7.4.4 ECUs running software 1037353511 for this page. Hardware 0261206942 is known with 4 software versions in our catalogue; this page is 1037353511.
Works with all common tools – KTAG, KESS3, Flex, Autotuner, bFlash, PCMflash, BDM100 and similar tools. However, in rare cases an alignment with a hex editor or WinOLS may be needed before writing. For professional use – workshops and ECU technicians.
How to identify your ECU
On the label
Two numbers on the label matter: 0 261 206 942 and 96 387 834 80. The 1039S… sticker is not a software number – 1037353511 is only visible through a tool or in INFOS.html.

What KESS / KTAG show
| Field | What the tool shows |
|---|---|
| HW | often empty – use the label |
| SW | 1037353511 |
| SW upg. (SW màj., soft up, UpgSW) | empty, or 1037353511 again |
Expected ID screen: SW 1037353511, upgrade field empty or identical. Anything else in the upgrade field → not this file, search the upgrade number instead.
Other files you may need
- Same hardware 0261206942: SW 1037353327 (PSA 9638783480) – 206 1.6 16V · SW 1037353507 (PSA 9638783480) – 206 1.6 16V · SW 1037367868 (PSA 9638783480) – 206 1.6 16V
- Other Peugeot 206 ME7.4.4 files: 0261207477 · 1037353694 · 0261207477 · 1037353920 · 0261207477 · 1037366743
- Bosch ME7.4.4 family: all ME7.4.4 original files →
- Guides: ORI, virgin and full backup explained · ECU file types
Your tool shows another number? Ask for it – we read new references every week.
Questions about this file
Is ME7.4.4 0261206942 1037353511 ORI a full BDM backup or only the flash?
Full backup: the 512 KB external flash and the 95160 EEPROM were read together from the same ECU (Peugeot 206 1.6 16V application) – enough to restore a bricked unit, clone it or start a stage 1 on 1037353511.
My tool shows SW 1037353511 but the HW field is empty. Right file?
Yes, KESS and KTAG often leave HW blank. Check 0 261 206 942 and 96 387 834 80 on the label; if the upgrade line is empty or repeats 1037353511, this is your file.
Same hardware 0261206942 but my tool shows SW 1037353327?
Then you need the other file for this hardware: SW 1037353327 with PSA 9638783480, sold on its own page. 0261206942 alone is not enough to choose.
Why are there 2 downloads for one software?
We read 2 ECUs running 1037353511. Write read #1; the other differ by VIN, immobiliser and adaptation data in the EEPROM, useful to compare with your own read.
Does the EEPROM contain the immobiliser of the donor 206?
Yes, as read. This is the original state of ECU 0261206942, not a virgin file: for another car, transfer your own immobiliser data or use a virgin EEPROM.
Which EEPROM file should I write – 2 / 4 / 8 KB?
The size your tool proposes for a 95160: 2 KB is the native format, the others hold the same data in the larger formats some tools expect. Most tools simply refuse a wrong size.


Reviews
There are no reviews yet.